Connect GOLFJOY Launch Monitor to GSPro — No Adapter Needed
Setup in under 5 minutes. Choose the easiest way below.
⭐ Recommended
Use Install Helper
The fastest way to auto-configure your IP for GS Pro.
Manual Setup
For advanced users who prefer manual IP entry.
Scroll to Guide
1 Download the Install Helper
Click the button below. Save the file to your Downloads folder.
Download Tool
2 Connect Your Launch Monitor to PC
Use Ethernet cable to connect launch monitor directly to your computer's network port.
3 Run the Installer
Launch the Install Helper on your PC. Once opened, your launch monitor model should automatically appear in the device list.click the 'Auto Set' button to automatically set the correct ethernet port IP address.
4 Confirm automatic network configuration
Click 'Yes' to complete the setup.
5 Launch GS PRO & Connect
Open GS PRO. Your launch monitor will appear and connect automatically.
1 Open the Run Window
Turn on your computer and press 'Windows + R' on your keyboard. This will open the Windows Run dialog.
2 Open Control Panel
Type 'control panel' into the Run window, then press 'OK' to open the Control Panel.
3 Open Network Settings
In the Control Panel, click 'View network status and tasks' under the Network and Internet section.
4 Open Adapter Settings
On the left side of the window, click 'Change adapter settings' to view your available network connections.
5 Open Ethernet Properties
Right-click your unidentified network adapter (usually Ethernet), then select Properties from the menu.
6 Configure IPv4 Settings
Find 'Internet Protocol Version 4 (TCP/IPv4)' in the list and double-click it to open the IPv4 configuration window.
7 Enter IP Address Manually
Configure these exact settings:
IP Address:192.168.147.66
Subnet Mask:255.255.255.0
9 Launch GS PRO
Open GSPro. Your launch monitor is now ready to use with GSPro.
Still need help?
Our support team is ready to assist with setup, troubleshooting, and anything else you need.